Posts Tagged ‘parade barricade’

donotenterYou are in charge of finding the most economical way to enclose or completely block off a given area.  How do you approach this?  Well, first order of business is finding out the distance that needs to be covered as well as how durable the products need to be.

Figuring out the distance that needs to be covered is just a matter of going out to the area with a tape measure.  But knowing how durable the products need to be means you need to know what you are blocking the public from.  Is it a giant hole in the sidewalk?  You are going to want to use Jersey Barriers or barricades that are hard to move, to prevent a car or person from falling in.  How about electric wires dangling near a sidewalk?  I would again recommend hard to move barricades, as well as a sign warning of the wires.

It really comes down to the level of danger.  If it’s just a bump in the sidewalk or a pothole you can use delineators with caution tape looped through them.  These can be called ‘Ringtop’ or ‘Looper’ Tubes and allow caution tape to be inserted through the loops or rings on top.

dangerFor the high danger areas traffic barriers filled with water or sand (to make them hard to move) linked together with high intensity barricade lights blinking on top will give adequate enclosure.

For medium danger blocking, try parade barricades back to back closing off the whole area.  Mounting a barricade light on top will help the barricades be seen at night.

And really as mentioned above for the low danger areas all you need is a delineator with a hole on top so caution tape or rope can be looped through.  The weight of the base is going to add on to your shipping cost so go as light as possible.  10lbs will usually do the trick unless you are in a high wind area.  Also there is most likely no need for reflective tape on the delineators unless this is being used on a road.

553Now some tips to get your costs down – choose the lowest weight (when empty) traffic barrier because when it’s filled with water even the lightest barrier will be almost impossible to move from an impact.

With the parade barricades you don’t need sheeting on both sides as each barricade will serve the purpose of just warning those on the outside of the enclosure – not the inside.

 

 

Parade Barricades and Their Many Names

Friday, December 14, 2012 By: admin

They can be called parade barricades, a-frame barricades type 1 or type 2 barricades or a bunch of other things.  Basically these are barricades used for crowd control or to block off certain areas in a parking field, parking lot etc.  Two legs with one or two boards ranging from 4′ long to 12′ long (or even longer if you have a custom built one).

The legs and boards also have options.  For example, if you want orange/white reflective sheeting, you can have it on one side, two sides and it can range from Engineer Grade to Diamond Grade.  The boards can be either 1″ thick or 1.75″ thick and the legs can be sand fill-able to add extra weight for sturdiness.  If you have any question about parade barricades please feel free to leave a comment below.