D Cell Hi Intensity Type B

Email to a Friend

• This model will project an adequate signal for up to sixty days on 4 D-Cell Alkaline Batteries

• Lightweight High Intensity Lights Acceptable Device for NCHRP-350 (see WZ-54)

•  Operates on D-Cell Batteries Tested to MUTCD and I.T.E. standards by an approved certified laboratory Polycarbonate lenses and High Impact Polypropylene housing

• Note: You have the option of a 6 volt or 3 volt light. The light pictured is the 3 Volt light, the 6 Volt light has a slightly smaller base.

What types of batteries are required for the different power configurations?
For 3 volt units, D Cell batteries are required. For 6 volt units, 6 volt batteries are required.

How bright are these lights?
Type B Hi Intensity barricade lights are very bright, significantly brighter than your average barricade light.

Can these lights be seen during the day?
Yes, these lights are specifically made for instances where a light needs to be seen during the day as well as during the night.

How long do these units last?
The lifetime of these lights is about 3-5 years. Three years is pretty much the minimum for these, and they have been known to last over five years, but 3-5 is the average range.

How do these mount to objects? Can they mount to ____?
With this unit you get a bolt and a fastener. The bolt threads through a hole in the base of the unit and through a hole in the object which you wish to mount it through, and then gets fastened on the other side. These can mount to most traffic safety products including barricades, barriers, looper tubes, ringtop cones, traffic drums, ultra panels and more.

Can I get a different color lens?
If you would like a different color lens please give us a call to see what we have available. Prices can increase since the color of the LEDs need to match the color of the lens