Hi Intensity Type B Barricade Light

Email to a Friend

• Meets Current I.T.E. and MUTCD standards.

• Tested in approved certified laboratory

• Available in 12 volt, 6 volt or 3 volt configurations

• Can operate on one or two spring terminal batteries in 3 volt or 6 volt configurations

• May be considered a lightweight light meeting NCHRP 350 when using one battery

• Red lens option available (please call)

• The original 212 12v will provide adequate signal for up to sixty days, 212-6 6v will operate on one six volt air alkaline battery for 150 days and two months with two industrial grade batteries, and the 212-3 will operate over 300 days on two 3v air alkaline batteries

What types of batteries are required for the different power configurations?
For 3 volt units, D Cell batteries are required. For 6 and 12 volt units, 6 volt batteries are required.

How bright are these lights?
Type B Hi Intensity barricade lights are very bright, significantly brighter than your average barricade light.

Can these lights be seen during the day?
Yes, these lights are specifically made for instances where a light needs to be seen during the day as well as during the night.

How long do these units last?
The lifetime of these lights is about 3-5 years. Three years is pretty much the minimum for these, and they have been known to last over five years, but 3-5 is the average range.

How do these mount to objects? Can they mount to ____?
With this unit you get a bolt and a fastener. The bolt threads through a hole in the base of the unit and through a hole in the object which you wish to mount it through, and then gets fastened on the other side. These can mount to most traffic safety products including barricades, barriers, looper tubes, ringtop cones, traffic drums, ultra panels and more.