TrafFix 36" x 72" Water Filled Traffic Barrier w/ Fence System [Price for 5]
TrafFix Water-Wall Series: Water Filled Barriers with Fence System
The TrafFix 36x72 Water-Wall barrier with fence system combines a high-strength HDPE water-filled base with a removable steel fence panel in a single modular unit. NCHRP-350 certified at TL-1, TL-2, and TL-3. Fills with 110 gallons on-site to reach approximately 1,110 lbs. The 9-point connection system and 90-degree pivoting hinge allow runs to navigate corners and curves with no gaps. Available in orange and white. Sold in minimum quantities of 5 units at $454.95 per unit.
Product Specifications
Dimensions and Weight
- Height: 36 inches (barrier base, without fence panel)
- Length: 72 inches
- Width: 16.5 inches
- Empty Weight: 65 lbs
- Filled Weight (Water): Approximately 1,110 lbs (110 gallons)
- Filled Weight (Sand): Higher than water-filled weight -- exact figure not published; confirm with manufacturer before specifying
- Material: High-strength HDPE with enhanced UV resistance
- Colors Available: Orange, White (custom colors available on request)
- Brand: TrafFix -- Water-Wall Series
Fill and Connection
- Fill Capacity: 110 gallons
- Fill Method: Large recessed fill cap for quick on-site filling
- Drain: Dual-sided drain plugs for faster teardown and redeployment
- Connection System: Reinforced 9-point connecting system
- Hinge: 90-degree pivoting hinge for corners, curves, and tight turns
- Handling: Forklift and pallet jack through-holes
- Light Mount: Double-sided barricade light mount for enhanced visibility
Fence Panel
- Fence Dimensions: 6 ft 1 in x 5 ft 1 in
- Fence Material: Steel
- Included: Yes -- steel fence panel included with every barrier unit
- Attachment Method: Extended steel T-pins passing through the fence panels into the barrier knuckles
- Removable: Yes -- fence panels detach fully and can be stored separately when not in use
Certifications
- NCHRP-350 TL-1 Longitudinal Barrier
- NCHRP-350 TL-2 Longitudinal Barricade
- NCHRP-350 TL-3 Barricade
- MASH Tested, Passed and Eligible when used with the TrafFix Water-Wall LCD or Water-Cable Barrier system
Pricing and Minimum Order
- Unit Price: $454.95
- Minimum Order Quantity: 5 barriers
- Minimum Order Total: $2,274.75
- Contact us for volume pricing on larger quantities.
The TrafFix 36x72 Water-Wall traffic barrier with fence system is a complete, modular perimeter control solution combining a high-strength HDPE water-filled base with a removable steel fence panel for jobsite security, pedestrian guidance, and crowd management in a single unit. Certified under NCHRP-350 at TL-1, TL-2, and TL-3, and MASH tested and eligible when used with the Water-Wall LCD or Water-Cable Barrier system, this barrier delivers certified performance across a wide range of traffic control and perimeter security applications. At just 65 lbs empty, it deploys without cranes or heavy equipment. Fill on-site with 110 gallons of water to reach approximately 1,110 lbs of working mass. The reinforced 9-point connection system keeps barrier runs aligned and stable, while the 90-degree pivoting hinge allows runs to navigate curves, corners, and tight turns with minimal gaps. Available in orange and white. Sold in minimum quantities of 5 units at $454.95 per unit.
What Is a Water Filled Traffic Barrier with a Fence System?
A water filled traffic barrier with fence system combines two components into a single modular unit -- a heavy plastic base that fills with water for stability and a steel fence panel that extends above the barrier to provide security, visual separation, and pedestrian control. The result is a complete temporary fencing solution that delivers both vehicle channelization at ground level and physical separation at standing height, without requiring two separate product types or installation crews.
The TrafFix Water-Wall fence system takes this concept further with NCHRP-350 TL-3 certification, meaning the barrier meets federal crash test standards for use in highway work zones and high-risk traffic environments. The removable steel fence panels attach using extended T-pins threaded through the panel into the barrier knuckles, making installation and removal fast without tools. When the fence is not needed, the barrier base functions as a standalone channelizing device.
This 36x72 model ships at 65 lbs empty, making it practical for small crews to position without mechanical assistance before filling. Once filled with 110 gallons of water, the base reaches approximately 1,110 lbs of working mass. The 9-point reinforced connection system links units into continuous runs that stay aligned under lateral pressure, and the 90-degree pivoting hinge allows runs to turn corners and navigate irregular site layouts without leaving gaps.
Where to Use the 36x72 Barrier with Fence System
Construction Site Fencing and Perimeter Security
Replaces traditional temporary chain-link fencing without posts, ground anchors, or a dedicated installation crew. Position, fill, and connect. When the site layout changes, use the built-in forklift and pallet jack through-holes to reposition the entire run without draining and refilling.
Road Work Zones and Traffic Control
NCHRP-350 TL-3 certification qualifies this barrier for highway and roadway work zones requiring federally tested traffic control devices. The link runs to separate active lanes from work areas and protect workers from traffic intrusion. The double-sided barricade light mount on each unit supports nighttime visibility without a separate mounting solution.
Crowd Control and Event Perimeters
The barrier and fence combination delineates entry and exit points, controls pedestrian flow, and prevents vehicle intrusion at outdoor events, festivals, and public gatherings. Units connect at 90-degree angles to configure corridors and perimeters of any shape, deploy and break down quickly, and store compactly when empty.
Parking Lot Closures and Access Control
Close lots, block unauthorized access, or channel traffic around utility work without post-setting or ground anchoring. The weighted base holds position against incidental contact. Drain and relocate when the closure is no longer needed.
Data Centers and Technology Facilities
A fast alternative to traditional temporary fencing for data center buildouts requiring a secure perimeter during construction or phased installation. Units ship in stock and deploy immediately, with no ground anchoring or installation crew required.
Utility Work Areas and Restricted-Access Zones
Used by municipalities and utility contractors to establish secure work zones around open excavations and live electrical work where pedestrian exclusion at standing height is required. NCHRP-350 certification supports public-sector procurement on federally funded projects.
How to Set Up and Connect These Barriers
- Step 1: Position each barrier in its final location before filling. At 65 lbs empty, units can be moved by hand for small runs or repositioned at scale using the built-in forklift and pallet jack through-holes.
- Step 2: Attach the steel fence panel to the barrier by threading the extended steel T-pins through the fence panel into the barrier knuckles. The fence panel is included with each unit and requires no additional hardware for standard vertical installation.
- Step 3: Open the large recessed fill cap on the barrier. Use a standard garden hose, water truck, or pump to fill each unit to capacity. Each barrier holds 110 gallons of water, reaching approximately 1,110 lbs when full.
- Step 4: Secure the fill cap tightly after filling.
- Step 5: Connect adjacent units using the reinforced 9-point connection system. For straight runs, units link end-to-end. For corners, curves, or tight turns, use the 90-degree pivoting hinge to adjust the angle at each connection point while maintaining a continuous, gap-free barrier line.
- Step 6: If adding a barricade light, mount it in the double-sided light mount built into each unit for nighttime and low-visibility applications.
- Step 7: For teardown and redeployment, open both dual-sided drain plugs to empty the barrier from both sides simultaneously. Once empty at 65 lbs, units can be repositioned by hand or moved at scale with a forklift. Remove fence panels by reversing the T-pin process and store them separately for transport.
Key Advantages Over Standard Temporary Fencing
Traditional temporary chain-link fencing requires post-setting, ground anchors, installation labor, and a return crew for removal. The TrafFix barrier and fence system eliminates all of those dependencies.
- No posts or ground anchors required
- Small crew setup for short runs without equipment
- Forklift and pallet jack compatible for large-scale repositioning and redeployment
- 9-point reinforced connection keeps runs aligned without stakes or wire ties
- 90-degree pivoting hinge navigates corners without custom-cut filler sections
- Dual drain plugs for fast teardown on rotating job sites
- Double-sided light mount for nighttime applications with no separate hardware
- Weighted base at 1,110 lbs resists displacement without tethering or ballast bags
- Steel fence panel included with every unit -- no separate fence purchase required
- NCHRP-350 TL-3 certified for use in federally governed work zones and public-sector projects
Frequently Asked Questions
Is the steel fence panel included with the barrier?
Yes. Every 36x72 TrafFix Water-Wall unit includes the steel fence panel. There is no separate fence purchase required. The fence panel measures 6 ft 1 in x 5 ft 1 in and attaches using extended steel T-pins threaded through the panel into the barrier knuckles.
Can the fence panel be removed?
Yes. The fence panels are fully removable. The T-pin attachment system allows panels to be detached and stored separately when only the barrier base is needed. The barrier base functions as a standalone water filled channelizing device without the fence panel installed.
How much does this barrier weigh when filled?
When filled with 110 gallons of water, the TrafFix Water-Wall barrier weighs approximately 1,110 lbs. When empty, it weighs 65 lbs, making it practical for one-to-two person positioning and deployment before filling on-site.
Can these barriers be filled with sand instead of water?
Yes. Sand is a confirmed compatible fill medium for the TrafFix Water-Wall barrier and will increase total mass above the water-filled weight of approximately 1,110 lbs. The exact sand-filled weight depends on fill level and material density and has not been published by the manufacturer. Sand fill is best suited for permanent or semi-permanent installations where the barrier will not need to be relocated frequently.
What certifications does this barrier carry?
This barrier carries NCHRP-350 approvals at TL-1 Longitudinal Barrier, TL-2 Longitudinal Barricade, and TL-3 Barricade. It is also listed as MASH Tested, Passed and Eligible when used with the TrafFix Water-Wall LCD or Water-Cable Barrier system. These certifications make it appropriate for federally governed work zones and public-sector procurement requiring DOT-tested equipment.
Does this barrier accept a barricade light?
Yes. Each barrier includes a double-sided barricade light mount, allowing a flashing warning light to be attached on either face of the unit for nighttime and low-visibility work zone applications.
How does the 90-degree pivoting hinge work?
The pivoting hinge connects adjacent barrier units at the end connection point and allows the run to rotate up to 90 degrees at each joint. This allows runners to navigate right-angle corners, gradual curves, and irregular perimeter shapes without leaving gaps in the barrier line or requiring custom-cut filler sections.
How do I drain and redeploy these barriers?
Each barrier includes dual-sided drain plugs -- one on each side of the base. Open both plugs to drain from both sides simultaneously, which reduces emptying time compared to single-drain configurations. Once empty at 65 lbs, units can be repositioned by hand for small moves or lifted at scale using the built-in forklift and pallet jack through-holes.
Is this barrier compatible with the 42x72 water filled barriers?
Compatibility between the TrafFix 9-point connection system on this barrier and the end-cap connector system on the 42x72 barrier has not been confirmed by the manufacturer. Do not assume the two systems link without verifying with our team or the manufacturer directly. Contact us before ordering if mixed-unit connections are required on your job site.
What colors are available?
This barrier is available in orange and white as standard colors. Custom colors may be available on request. Contact us for custom color availability and lead times.
How many barriers do I need?
Divide the total linear feet of your perimeter by 6 -- each 72-inch barrier covers 6 linear feet. A 100-foot run requires approximately 17 units. A 300-foot perimeter requires approximately 50 units. This product is sold in minimum quantities of 5 units at $454.95 per unit, with a minimum order total of $2,274.75. Contact us for volume pricing on larger orders.
