Archives
- April 2020 (2)
- August 2015 (4)
- May 2015 (2)
- November 2014 (3)
- April 2014 (1)
- January 2014 (1)
- December 2013 (1)
- November 2013 (4)
- October 2013 (4)
- September 2013 (6)
- August 2013 (8)
- July 2013 (5)
- May 2013 (1)
- April 2013 (2)
- March 2013 (2)
- January 2013 (2)
- December 2012 (5)
- November 2012 (2)
- October 2012 (1)
- August 2012 (1)
- July 2012 (2)
- June 2012 (1)
- July 2010 (12)
- June 2010 (62)
- May 2010 (60)
- April 2010 (23)
- March 2010 (23)
- February 2010 (19)
- January 2010 (7)
Categories
A Good Type III Traffic Barricade PT 2
Monday, March 1, 2010 By: Transportation Supply
Category: Transportation Safety
Last week I posted a type III traffic barricade piece about different options that make a good type 3 barricade. I left off on the type of paint that you should look for (weather resistant baked enamel) if you want your barricade to be used for awhile. Most barricades, especially type III, are made to accept two barricade lights on each side, but just in case, check to make sure your brand does.
For easy transportation, make sure your barricades can be joined together. Wind stability is also important, what good is a barricade if its tipped over? There should also be many options for reflective tape quality, if they don’t have the type your state or country requires, try looking somewhere else.
Tags: traffic barricade, traffic barricades, type 3 barricade, type 3 barricades, type III barricade, type III barricades
This entry was posted
on Monday, March 1st, 2010 at 10:12 am and is filed under Transportation Safety.
You can follow any responses to this entry through the RSS 2.0 feed.
Both comments and pings are currently closed.
Comments are closed.